New products

Application: Create realistic skin texture and wrinkles. Features: 3D printed design, Comes in several awesome colors: Blue,Green,Black,Red,Orange...

Wrinkle tool #4 is a single sided tool with 3 prongs (.047 wire). You can quickly add lots of wrinkles to larger areas by dragging the end back an...

Wrinkle tool #3 is a single sided tool with 3 prongs(.025 wire). You can quickly add lots of wrinkles to larger areas by dragging the end back and...

Wrinkle tool #2 is single sided with 6 prongs. You can quickly add lots of wrinkles to larger areas by dragging end back and forth across area to ...

Wrinkle tools are for adding realistic wrinkles to your sculpture by dragging either side across the surface to be textured. WT1 has two sides one...

PT3 is perfect for creating the Dash type of skin pores found on the forehead and face. For best results for human skin texture, place a piece of ...

PT2 is our 7 Pronged Skin Pore tool for larger areas. For best results for human skin texture, place a piece of plastic wrap over the area of scul...

Pore Tool #1 is our 4 pointed skin pore tool. For best results for human skin texture, place a piece of plastic wrap over the area of sculpture to...

Itty Bitty tools are for teeny tiny sculptures. They are made of very fine wire and not to be used for digging very hard surfaces. If the surface ...

Use either end of tool, always use a criss cross pattern of the desired area of sculpture to ensure a more even surface. Remember the is a finishi...

Jeweler Blade #2 is a single double sided rake tool with a flat and a round end. These tips are a little smaller in size than the Jeweler Blade #1...

Jeweler Blade #1 is a single double sided rake tool with a flat and a round end. These tips are a little Larger in size than the Jeweler Blade #2 ...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

This is our ST4 X-Heavy Double ended tool with a flat and round end using our heaviest Bass string. Using either end of tool, always use a criss c...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

This is a 4 double ended tool pack which consists of a Double ended large and small Flat, Double ended large and small Slant, Double ended large a...

This is a 4 double ended tool pack which consists of a Double ended large and small Flat, Double ended large and small Slant, Double ended large a...

This is a 4 double ended tool pack which consists of a Double ended large and small Flat, Double ended large and small Slant, Double ended large a...

For use with a standard caulking gun. Great for injecting large amounts of epoxy, laying a lengthy bead of epoxy or making fillets. Can be refille...

A toughened, versatile epoxy that is conveniently pre-thickened for permanent waterproof bonding of plastic, fiberglass, ceramics, metals, damp an...

A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods....

This Static Mixer is used for the Six 10 Thickened Epoxy.

Six10® Thickened Epoxy Adhesive combines the strength and reliability and excellent physical properties of a two-part WEST SYSTEM Epoxy with point-...

423 Graphite Powder is a fine black powder that can be mixed with epoxy to produce a low-friction exterior coating with increased scuff resistance...

A proprietary blend designed to improve cured epoxy’s moisture exclusion effectiveness. 422 is used as a barrier coating additive to help prevent ...

410 Microlight™ is the ideal low-density filler for creating a light, easily-worked epoxy fairing compound especially suited for fairing large are...

407 Low-Density filler is a blended microballoon-based filler added to epoxy resin/hardener to make fairing putties that are easy to sand or carve...

406 Colloidal Silica is an epoxy thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead ...

405 Filleting Blend Adhesive Filler is a strong, wood-toned epoxy filler for use in epoxy joints and epoxy fillets on naturally finished wood. It ...

404 High-Density Adhesive Filler is an epoxy thickening additive developed for maximum physical adhesive properties in hardware bonding where high...

403 Microfibers, a fine fiber blend, is used as a thickening additive with resin/hardener to create a multi-purpose adhesive, especially for bondi...

These thin polyurethane foam covers are the only roller covers recommended for epoxy application. The thin foam allows you to control film thickne...

300 Mini Pumps are designed for convenient and accurate metering of Group A, B, and C WEST SYSTEM 105 Resin-based epoxy. The 300 Mini Pump Set C...

Use with 105 Resin Blush-free 207 Special Clear Hardener was developed for coating and fiberglass cloth application where an exceptionally clear, m...

Use with 105 Resin 206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It a...

Used with 105 Resin 205 Fast Hardener is a medium-viscosity epoxy curing agent. It is used in a majority of bonding situations, at lower temperatur...

Requires 205 Fast Hardener, 206 Slow Hardener or 207 Special Clear Hardener. 105 Epoxy Resin is the base material on which all WEST SYSTEM 105 Syst...